ARTU100 Series Remote Terminal Units

RS485 (MODBUS -RTU)
Channel state indicator and communication state indicator
24VDC (±10%); 220VAC, allow AC/DC 85~265V
2-way 10-100mbits adaptive Ethernet communication, support IPV4, IPV6.

Features Specifications Drawings

Features of ARTU100 Series Remote Terminal Units

1. 2-way 10-100mbits adaptive Ethernet communication, support IPV4, IPV6.

2. Support Web page parameter configuration, UDP broadcast, SNMMP network management, DHCP automatic access IP.

3. It can realize 8-way Sever/Client function, and realize 8-way client connection or 8-way server connection at the same time.

4. 8-way RS485 communication, baud rate support 1200-115200 can be set, data bit, check bit, stop bit can be set; each 485 can be connected to 30 meters.

5. The protocol conversion between MODBUS TCP and MODBUS RTU can be realized.

remote terminal unit in smart grid

Specifications of ARTU100 Series Remote Terminal Units

PQWER SUPPER	AC/DC 85-265V, DC48V
POWER CONSUMPTION	≤9W (excluding modules); ≤15W (including modules, up to 3 modules)
MODEL	ARTU100-K32	32-path DI (active/passive, optional)
	ARTU100-K16	16-path DI (active/passive, optional)
	ARTU100-KJ8	8-path DI (active/passive, optional); 8-path DO, output mode: relay normally-open contact output, contact capacity; AC 250V/3A DC 30V/3A;
COMUMICATION	485 communication	RS485 interface	2-path 485 communication; Modbus-RTU protocol;baud-rate 1200 ~ 38400bps
OTHER	Dial switch	10 bits
	Indicator light	20 indicator lights