Data Center Energy Monitoring & Management Solutions

HMI

ATP007kt

ATP010kt

1. 7 or 10 inch touch screen

2. Real-time monitoring and display voltage, current, power, energy, power quality, switch status, waveform curve and so on.

3. monitoring device alarm, communication and other parameters can be configured on the screen.

4. 2 RS485 and 1 Ethernet interface, and data can be uploaded by RS485 or RJ45.

AC incoming line monitoring module

AMC16Z-ZA

1. Installation: DIN rail 35mm

2. Measurement:A+B independent 3 phase circuits, 6DI2DO,2 leakage current,1 temp. and humidity.

3. With DC 24V output power supply for outgoing line module and touch screen.

4. Communication: RS485 Modbus RTU

AC outgoing line monitoring module

AMC16Z-FAK24

AMC16Z-FAK48

1. Installation: DIN rail 35mm

2. Can measure up to 16 circuit 3 phase or 48 circuit single phase

3. DC24V power supply

4. Communication: RS485 modbus RTU

AC outgoing line current transformer

AKH-0.66W

Current ratio: 100A/50mA

Common Specification: 100A/50mA

DC incoming line monitoring module

AMC16Z-ZD

1. Measurement:A+B independent circuits,6DI2DO,1 temp. And humidity.

2. With DC 24V output power supply for outgoing line module and touch screen.

3. Communication: RS485 modbus RTU

DC outgoing line monitoring module

AMC16Z-FDK24

AMC16Z-FDK48

1. Installation: DIN Rail 35mm

2. Can measure up to 48 circuits DC outgoing line

3. DC24V power supply

4. Communication: RS485 modbus RTU

DC incoming line insulation monitoring module

AMC16Z-ZJY

1. Installation: DIN Rail 35mm

2. Measure A+B independent DC circuit ground insulation resistance of main bus

3. DC24V power supply

4. Communication: RS485 modbus RTU

DC outgoing line insulation monitoring module

AMC16Z-FJY

1. Installation: DIN Rail 35mm

2. Measure 24 circuits ground insulation resistance of DC outgoing line

DC outgoing line hall effect current sensor

AHKC-BS

Current ratio: 100A/5V

Common Specification: 100A/5V